Click here to close now.




















Welcome!

Industrial IoT Authors: Eric Aarrestad, Dana Gardner, Roger Strukhoff, Pat Romanski, Elizabeth White

Related Topics: PowerBuilder, Microsoft Cloud

PowerBuilder: Article

The PostOpen Event – Why It Is So Important

PowerBuilder fundamentals

Normally I try to write applications on the DataWindow or Appeon but every now and then I get a question that makes me sit back and say, "Huh?"

In this case the question concerns the PostOpen event. I've seen that event named different things: ue_post_open, postOpen, post_open, ue_postOpen, etc. It has, as far as I can see, always had post and open in the name of the event. Further, just about every framework that I've ever seen has had that event in the base window.

The question that I was asked was, "Why is that event there?"

The programmer wanted to know why there was code in the post open and why was it not just put at the end of the open event? At first I was really confused by the question. It was like he was asking me why do we have arrays? I just couldn't imagine not knowing the answer.

Then it occurred to me that I learned the answer to that question from a book that was published almost 20 years ago. As far as I can tell there are no new books on PowerBuilder and there are only two print magazines, this one and the ISUG magazine.

That's it.

Further I came to think of the tremendous responsibility that the few PowerBuilder authors share. New PowerBuilder programmers turn to us for information and there aren't that many of us left writing. So that leaves a whole lot of PowerBuilder programmers who get all their training from reading the code of other programmers.

Often those other programmers were consultants who wrote the code ten years ago and worked for consulting firms that no longer exist.

To make a bad situation worse a lot of times those programmers are brave souls that have been recruited from other disciplines. When the company finds that their last PowerBuilder programmer has just quit because he got a much better offer they turn to their existing programming staff and ask who would like to pick up PowerBuilder. They may point out that there are 6 or 10 or, as in the case for one company for which I recently worked, 26 PowerBuilder programs that are all critical to the company. The PowerBuilder programmer would become indispensable to the company.

So suddenly a brave Visual Basic or Java programmer finds PowerBuilder installed on his machine. His boss pats him on his pointy little head and tells him that Google is his friend.

Where would you turn? If you picked up the mantle and offered to learn a language that you knew nothing about, what would you do? You'd turn to Amazon or Google. If you type "best PowerBuilder books" in Google the first mentioned is my Definitive DataWindow which was published 13 years ago and is embarrassingly out of date...and out of print.

Let's go to Amazon, there you will find the latest PowerBuilder book is for version 9. It was published 10 years ago. Since then... nothing.

Why should I be surprised that things that I find fundamental are entirely unknown by the newest PowerBuilder programmers.

Warning: If you are a seasoned PowerBuilder programmer the rest of this article will bore you silly.

There is an open event in a window. This is the event that happens when the window is "opened." Now the word ‘open' can be deceptive. A lot of people feel that a window is only opened when it is shown on the screen.

That would be wrong.

The open of a window begins when the open command is issued. That is to say, with a line like:

Open(w_client_editor)

The problem, the whole reason that a post open event is required goes all the way back to Microsoft Windows 3.0 Old Windows programmers will remember version 3.0 very well. Version 3.0 was almost the death of Microsoft Windows. It was unbearably slow. I am not exaggerating; it was the slowest version of Windows that was ever released.

It was so slow that Windows users were seriously studying what the impact of changing to another - any other - operating system would be.

This time Microsoft listened... and panicked. They did a study to determine what it is that makes the user perceive speed in an application. What could be changed to cause the user to believe that the application is faster with minimal real change to the operating system? It wasn't that Microsoft didn't want to address their problems with speed, they most certainly did, but addressing those problems would take time that Microsoft just didn't have. Microsoft was about to lose a lot of customers and once lost, it would be hard to get them back.

Microsoft learned that the visual perception strongly influenced the user's perception of speed. They learned that if the window POPPED onto the screen, all at once, even if the data wasn't there yet, then the users perceived speed. What killed the user perception was when they pressed a button and nothing happened for four seconds. The user would often punch that button two or three times. So Microsoft created operating system queues.

The graphics queue happened before the application queue. So graphics could be given a higher priority than the application and windows would paint faster. They released version 3.1 which was mostly just the addition of these queues (along with other changes like a floating point emulator in assembly code).

This was great but it broke the relationship of the open event with the code. This meant that you weren't guaranteed that everything would be created in the window until after the open event finishes.

Consider this code:

W_customer.open() event
Dw_1.setTransObject(sqlca)
Dw_1.retrieve()

This code would often result in a "Null object reference" error because dw_1 had not been created by Microsoft when the code ran.

Imagine how we felt when this happened. There was a null object reference in line 1 of the open event, but, but, but... that's dw_1. There it is, right there on the window! How can it be null? It's not dynamic. You put it there.

Okay, we learned that we should not put anything in the open event that referred to anything on the screen. Most of us learned to just not put anything at all in the open event except one line in the ancestor:

W_root.open() event
post event ue_post_open( )

For reasons already stated I imagine I can't rely on you knowing the difference between post event and trigger event or for that matter between postOpen and post open.

Okay, one at a time. Posting an event means that Microsoft Windows will open this window after the rest of the code in this script is executed. Basically it means, "Do this when you get a chance." So if you add that to the open event of your root window then it will call the ue_post_open event after all of the code in all of the descendants of this window is done.

Keep in mind the order of execution of events. First PowerBuilder goes to the farthest ancestor and then starts executing down the inheritance tree. If you have w_grandpa, and w_pa inherits from that and w_son inherits from that then the code in w_grandpa.open would execute first, then the code in w_pa, finally the code in w_son.

This means that if we put the post event in the open of w_grandpa, then the ue_post_open would happen after the last open event in the descendants. In our example:

W_grandpa.open->w_pa.open->w_son.open-> w_grandpa.ue_post_open-> w_son.ue_post_open->w_son.post_open

All that we have to do is create a ue_post_open event in our root window. We don't have to put anything in it, just create one. Then we post that event from the open event and we have a place now to put all our initialization code and don't have to worry about whether any object exists or not.

More important the screen will quickly draw or paint, giving the user the perception of speed. If you need to retrieve data and know it will take a short time, then you can set the pointer to an hourglass. I guarantee that your user will feel the window is faster.

I mentioned that most of us learned not to put anything in the open event. There is an exception to that rule. When your window is opened with a parameter then you should access the message object as the first line of code in your window.

Let me give you an example. Suppose that you open a window with a customer_id. You are going to use that customer_id as a parameter to the datawindow dw_1. Here is what you would do.

W_calling_window
Long ll_customer_id
Ll_customer_id = dw_detail.getItemNumber(dw_detail.getRow(), "customer_id")
openWithParm(w_customer_detail, ll_customer_id)

Now in the w_customer_detail window you need to set an instance variable. That's because we have just passed a variable to the new window and we are going to get it in the open event but we are going to retrieve the DataWindow in the ue_postOpen event. So let's do this. I will assume that you know how to declare an instance variable. Let's name it il_customer_id. Now let's look at the open event of w_customer_detail.

W_customer_detail.open()
il_customer_detail = message.longParm

Okay, now in the open event of w_customer_detail we have taken the longParm property of the global message object and put it in an instance variable.

Since we have inherited the w_customer_detail from whatever our base window is, the ue_postOpen event will automatically fire. That means that we don't have to fire off the event. Now I just have to put the code that we need in the window.

W_customer_detail.ue_postOpen()
dw_customer_info.setTransObject(sqlca)
dw_customer.retrieve(il_customer_detail)

Let's Do Some Housekeeping
I think that we've pretty well covered the post open event but in the process of doing that I've brought up a couple of other issues that I'd like to cover just to be complete.

First let's talk about post event as opposed to postEvent.

With the post event command you must know the name of the event that you want to post. You can pass the parameters normally. However, just like calling a function, the event has to exist and the parameters must be correct.

On the other hand the postEvent function takes a string as a parameter and that string is the name of the event. This means that you can store the name of the event in a table. In fact the event doesn't even have to exist. If it doesn't then nothing will happen. There will be no error thrown.

This makes the postEvent perfect for security systems where you can post an event based on a security role. Here is some code that might work for you in a menu event.

M_main.m_file.m_save.clicked
Datastore ld_security, ld_events
ld _secutity = create datastore
ld_events = create datastore

ld_events.dataobject = "d_events"
ld_security.dataobject = "d_get_security"

ld_events.setTransObject(sqlca)
ld_security.setTransObject(sqlca)

parentWindow.postEvent(ld_events.retrieve(ld_security.retrieve(gs_user_id)))

Using the postOpen function is very flexible but it is limited in the parameters that can be passed it. If you use the post event command, you can pass any number of parameters that you wish. The caveat is that the event must exist or you will get a compile time error. So the event that you used before for security cannot be done.

All that I just said for the postEvent and post event command applies also to the triggerEvent and trigger event commands.

Finally I'd like to mention the global message object.

This object is global. It can be accessed at any time by any other object. That means that if you access the message object in the postOpen event then another window may have changed your message object properties and this could corrupt what you are expecting.

Don't take this lightly. More than once I've debugged and found this error and believe me it is difficult to find. The problem is that it is not an error with logic or data but a timing error. These can be close to impossible to find.

Please take my word for this, make it a golden rule. If you open a window with a parameter, the first thing you do in the target or opened window is grab that value from the message object and store it.

Also, if you do a closeWithReturn then you need to immediately get the value from the message object.

There you have it. I've covered in some detail some basic information that might not be so easily learned any more.

More Stories By Richard (Rik) Brooks

Rik Brooks has been programming in PowerBuilder since the final beta release before version 1. He has authored or co-authored five books on PowerBuilder including “The Definitive DataWindow”. Currently he lives in Mississippi and works in Memphis, Tennessee.

Comments (1) View Comments

Share your thoughts on this story.

Add your comment
You must be signed in to add a comment. Sign-in | Register

In accordance with our Comment Policy, we encourage comments that are on topic, relevant and to-the-point. We will remove comments that include profanity, personal attacks, racial slurs, threats of violence, or other inappropriate material that violates our Terms and Conditions, and will block users who make repeated violations. We ask all readers to expect diversity of opinion and to treat one another with dignity and respect.


Most Recent Comments
ywerde 02/20/13 04:14:00 PM EST

In your introduction you clearly state the problem new PowerBuilder developers face when they find the IDE installed on their machine. You then go on to talk about the lack of current training materials.
One important cost effective training resource you omitted is the online training from ISUG/eLearnIT. Everyone can learn more here.

@ThingsExpo Stories
For IoT to grow as quickly as analyst firms’ project, a lot is going to fall on developers to quickly bring applications to market. But the lack of a standard development platform threatens to slow growth and make application development more time consuming and costly, much like we’ve seen in the mobile space. In his session at @ThingsExpo, Mike Weiner, Product Manager of the Omega DevCloud with KORE Telematics Inc., discussed the evolving requirements for developers as IoT matures and conducted a live demonstration of how quickly application development can happen when the need to comply wit...
SYS-CON Events announced today that HPM Networks will exhibit at the 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. For 20 years, HPM Networks has been integrating technology solutions that solve complex business challenges. HPM Networks has designed solutions for both SMB and enterprise customers throughout the San Francisco Bay Area.
The Internet of Everything (IoE) brings together people, process, data and things to make networked connections more relevant and valuable than ever before – transforming information into knowledge and knowledge into wisdom. IoE creates new capabilities, richer experiences, and unprecedented opportunities to improve business and government operations, decision making and mission support capabilities.
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at @ThingsExpo, James Kirkland, Red Hat's Chief Architect for the Internet of Things and Intelligent Systems, described how to revolutionize your archit...
MuleSoft has announced the findings of its 2015 Connectivity Benchmark Report on the adoption and business impact of APIs. The findings suggest traditional businesses are quickly evolving into "composable enterprises" built out of hundreds of connected software services, applications and devices. Most are embracing the Internet of Things (IoT) and microservices technologies like Docker. A majority are integrating wearables, like smart watches, and more than half plan to generate revenue with APIs within the next year.
Growth hacking is common for startups to make unheard-of progress in building their business. Career Hacks can help Geek Girls and those who support them (yes, that's you too, Dad!) to excel in this typically male-dominated world. Get ready to learn the facts: Is there a bias against women in the tech / developer communities? Why are women 50% of the workforce, but hold only 24% of the STEM or IT positions? Some beginnings of what to do about it! In her Opening Keynote at 16th Cloud Expo, Sandy Carter, IBM General Manager Cloud Ecosystem and Developers, and a Social Business Evangelist, d...
In his keynote at 16th Cloud Expo, Rodney Rogers, CEO of Virtustream, discussed the evolution of the company from inception to its recent acquisition by EMC – including personal insights, lessons learned (and some WTF moments) along the way. Learn how Virtustream’s unique approach of combining the economics and elasticity of the consumer cloud model with proper performance, application automation and security into a platform became a breakout success with enterprise customers and a natural fit for the EMC Federation.
The Internet of Things is not only adding billions of sensors and billions of terabytes to the Internet. It is also forcing a fundamental change in the way we envision Information Technology. For the first time, more data is being created by devices at the edge of the Internet rather than from centralized systems. What does this mean for today's IT professional? In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists addressed this very serious issue of profound change in the industry.
Discussions about cloud computing are evolving into discussions about enterprise IT in general. As enterprises increasingly migrate toward their own unique clouds, new issues such as the use of containers and microservices emerge to keep things interesting. In this Power Panel at 16th Cloud Expo, moderated by Conference Chair Roger Strukhoff, panelists addressed the state of cloud computing today, and what enterprise IT professionals need to know about how the latest topics and trends affect their organization.
It is one thing to build single industrial IoT applications, but what will it take to build the Smart Cities and truly society-changing applications of the future? The technology won’t be the problem, it will be the number of parties that need to work together and be aligned in their motivation to succeed. In his session at @ThingsExpo, Jason Mondanaro, Director, Product Management at Metanga, discussed how you can plan to cooperate, partner, and form lasting all-star teams to change the world and it starts with business models and monetization strategies.
Converging digital disruptions is creating a major sea change - Cisco calls this the Internet of Everything (IoE). IoE is the network connection of People, Process, Data and Things, fueled by Cloud, Mobile, Social, Analytics and Security, and it represents a $19Trillion value-at-stake over the next 10 years. In her keynote at @ThingsExpo, Manjula Talreja, VP of Cisco Consulting Services, discussed IoE and the enormous opportunities it provides to public and private firms alike. She will share what businesses must do to thrive in the IoE economy, citing examples from several industry sectors.
There will be 150 billion connected devices by 2020. New digital businesses have already disrupted value chains across every industry. APIs are at the center of the digital business. You need to understand what assets you have that can be exposed digitally, what their digital value chain is, and how to create an effective business model around that value chain to compete in this economy. No enterprise can be complacent and not engage in the digital economy. Learn how to be the disruptor and not the disruptee.
Akana has released Envision, an enhanced API analytics platform that helps enterprises mine critical insights across their digital eco-systems, understand their customers and partners and offer value-added personalized services. “In today’s digital economy, data-driven insights are proving to be a key differentiator for businesses. Understanding the data that is being tunneled through their APIs and how it can be used to optimize their business and operations is of paramount importance,” said Alistair Farquharson, CTO of Akana.
Business as usual for IT is evolving into a "Make or Buy" decision on a service-by-service conversation with input from the LOBs. How does your organization move forward with cloud? In his general session at 16th Cloud Expo, Paul Maravei, Regional Sales Manager, Hybrid Cloud and Managed Services at Cisco, discusses how Cisco and its partners offer a market-leading portfolio and ecosystem of cloud infrastructure and application services that allow you to uniquely and securely combine cloud business applications and services across multiple cloud delivery models.
The enterprise market will drive IoT device adoption over the next five years. In his session at @ThingsExpo, John Greenough, an analyst at BI Intelligence, division of Business Insider, analyzed how companies will adopt IoT products and the associated cost of adopting those products. John Greenough is the lead analyst covering the Internet of Things for BI Intelligence- Business Insider’s paid research service. Numerous IoT companies have cited his analysis of the IoT. Prior to joining BI Intelligence, he worked analyzing bank technology for Corporate Insight and The Clearing House Payment...
"Optimal Design is a technology integration and product development firm that specializes in connecting devices to the cloud," stated Joe Wascow, Co-Founder & CMO of Optimal Design, in this SYS-CON.tv interview at @ThingsExpo, held June 9-11, 2015, at the Javits Center in New York City.
SYS-CON Events announced today that CommVault has been named “Bronze Sponsor” of SYS-CON's 17th International Cloud Expo®, which will take place on November 3–5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. A singular vision – a belief in a better way to address current and future data management needs – guides CommVault in the development of Singular Information Management® solutions for high-performance data protection, universal availability and simplified management of data on complex storage networks. CommVault's exclusive single-platform architecture gives companies unp...
Electric Cloud and Arynga have announced a product integration partnership that will bring Continuous Delivery solutions to the automotive Internet-of-Things (IoT) market. The joint solution will help automotive manufacturers, OEMs and system integrators adopt DevOps automation and Continuous Delivery practices that reduce software build and release cycle times within the complex and specific parameters of embedded and IoT software systems.
"ciqada is a combined platform of hardware modules and server products that lets people take their existing devices or new devices and lets them be accessible over the Internet for their users," noted Geoff Engelstein of ciqada, a division of Mars International, in this SYS-CON.tv interview at @ThingsExpo, held June 9-11, 2015, at the Javits Center in New York City.
Internet of Things is moving from being a hype to a reality. Experts estimate that internet connected cars will grow to 152 million, while over 100 million internet connected wireless light bulbs and lamps will be operational by 2020. These and many other intriguing statistics highlight the importance of Internet powered devices and how market penetration is going to multiply many times over in the next few years.